Water and Sewage Treatment: Expertise Unlimited

I've been quite busy with learning to teach, but I went down to see a plant I upgraded about a year ago last Friday for a "health check".

As it took the operators three-quarters of an hour to even find the O+M manual, it looked as if it hadn't seen much use. The recommended daily checks had been reduced to a quick look through the fence as they went past, and no checks at all on weekends or holidays. They had turned the coagulant dose right down and filled the plant with 32% acid and alkali to save on chemical costs, and unsupervised tanker drivers had been walking on the tray-work. Despite all of this, everything was still basically working.

I'm going to do a bit of lab-work this afternoon to see if they can use a cheaper coagulant than the fancy blend the original plant installers recommended. At £2 a litre, I can see how they want to turn the dose down, even if it does degrade plant performance.

I'm off to Nottingham this morning to see a few examples of good lecturing practice, and if I have time, I'm going to make a start on the anaerobic digestion course I'm doing for Loughborough.

Labels: effluent, industrial, plant, treatment, troubleshooting

This is the polymer dosing pump and storage tank, for dosing an aluminium based coagulant for colour removal.

We refitted the old polymer dosing pump to a reconditioned IBC, and new downpipe. We also replaced its outgoing line with new twinwall stock.

The polymer pump was rewired to the new control system and interlocked to feed pump operation from its inverter.

Labels: alum, chemical, design, dosing, effluent, engineer, environment, etp, industrial, pharmaceutical, plant, problem, pump, treatment, troubleshooting, wastewater, water

So it turned out that the heating and aeration of the oily sludges as part of the test for aerobic degradation broke the emulsion, where all other attempts had failed. Investigations continue.

I got an interesting email from South Africa this week, prompted by my page on package plant failures.

Steve Nicol of Wastewater Watch in SA produces an amusing name and shame newsletter for those he considers to be rogue package plant manufacturers in his country.

Design is proceeding on the upgrading of the failing pharma effluent treatment plant. We should be on-site in October/November to carry out the work.

Labels: aerobic, africa, degradation, effluent, industrial, oil, package, PCB, pharmaceutical, plant south, sludge, waste, water

My French student is leaving today, so the supply of free assistance to my regular clients has ended!

The digestion experiments on PCB containing oily sludge seemed to give gently promising results, at least at 35C, so we may investigate further.

No problems with the turning down of the duff ETP's flow rate, so the client now has a bid for doing what is required to control the remaining non-compliances.

An enquiry for a metals removal plant came in this week, looks interesting, but the enquirer wants a free visit to discuss the job up-front, which may be problematic. I always find one can tell a serious from a speculative enquiry by whether the client will pay to meet you.

Labels: effluent, etp, industrial, metal, oil, PCB, problem, removal, sludge

I've decided to start a blog on the company website, covering things which interest me professionally.

I'm a Chemical Engineer and Environmental Scientist, working mainly in the field of Water Engineering, though I do also deal in more general environmental advice, mostly on behalf of a government funded scheme called Envirowise.

I used to work for water contractors who you will not now have heard of, because it is seemingly a rule in the water industry that companies have to change the name of their company from time to time, for a number of reasons. For good companies, this is usually something to do with the marketing department. For bad companies, the reasons may be less honourable. None of the people I used to work for went bust by bidding jobs at less than cost and then came back one month later as "(old company name) 2008 Limited", but this is far from uncommon in the industry.

I do quite a bit of work of packaged sewage treatment plants which are misbehaving, look after some groundwater treatment plants, and am also presently involved in something I do a bit of from time to time, water feature design. I am helping with the design of water features in the Parc1 development in Korea. Don't click on the link unless you have broadband, the graphic designers have gone nuts on the website.

I'm also interested in water quackery, and will post some stuff on this as I come across new examples.

Labels: chemical, design, effluent, engineer, environment, etp, groundwater, industrial, package, PCB, pharmaceutical, plant, problem, sewage, sludge, treatment, troubleshooting, wastewater