Water and Sewage Treatment: Expertise Unlimited

This is the polymer dosing pump and storage tank, for dosing an aluminium based coagulant for colour removal.

We refitted the old polymer dosing pump to a reconditioned IBC, and new downpipe. We also replaced its outgoing line with new twinwall stock.

The polymer pump was rewired to the new control system and interlocked to feed pump operation from its inverter.

Labels: alum, chemical, design, dosing, effluent, engineer, environment, etp, industrial, pharmaceutical, plant, problem, pump, treatment, troubleshooting, wastewater, water

This is the pH correction system, dosing up to 32% HCl and 20% NaOH by means of dosing pumps controlled by the yellow unit in the foreground.

Chemical storage is 2 No. 1000 L reconditioned IBCs.

Dosing lines are twin-wall for safety.

Chemical dosing operation is interlocked to feed pump operation via a feed from the inverter.

Labels: chemical, design, dosing, effluent, engineer, environment, etp, pH, pH dosing, pharmaceutical, plant, pump, treatment, waste, wastewater, water

Other than designing a solution to the problems of our new pharmaceutical client, I have been reviewing a book for The Chemical Engineer magazine, and looking at carrying out an experiment to determine how well anaerobic digestion might reduce PCB levels in oily sludges.

I am having difficulty at present sourcing a small chopper pump which can be controlled by inverter to provide a better, smoother feed to the pharma client's plant without blocking concerns. No problem getting one with 75mm discharge size or above, but the small ones don't have an over-rated motor, which is recommended for variable speed drive.

The book I am reviewing is "Elements of Environmental Chemistry" by Ronald Hites. Seems like a pretty good little textbook.

The oily sludges I hope to treat with AD have been a problem at a couple of sites I provide technical cover for for years now, and it is getting increasingly difficult and expensive to dispose of them. It would be nice if we can get PCB levels down to non-hazardous numbers by this process. The experiment is fairly quick and dirty, so we should have a rough answer by August.

Something amusing I saw today on the quackery front: truth in alternative medicine at last...

Labels: anaerobic, chemical, chemistry, chopper, degradation, digestion, engineer, environment, oil, PCB, pharmaceutical, pump, sludge

I've decided to start a blog on the company website, covering things which interest me professionally.

I'm a Chemical Engineer and Environmental Scientist, working mainly in the field of Water Engineering, though I do also deal in more general environmental advice, mostly on behalf of a government funded scheme called Envirowise.

I used to work for water contractors who you will not now have heard of, because it is seemingly a rule in the water industry that companies have to change the name of their company from time to time, for a number of reasons. For good companies, this is usually something to do with the marketing department. For bad companies, the reasons may be less honourable. None of the people I used to work for went bust by bidding jobs at less than cost and then came back one month later as "(old company name) 2008 Limited", but this is far from uncommon in the industry.

I do quite a bit of work of packaged sewage treatment plants which are misbehaving, look after some groundwater treatment plants, and am also presently involved in something I do a bit of from time to time, water feature design. I am helping with the design of water features in the Parc1 development in Korea. Don't click on the link unless you have broadband, the graphic designers have gone nuts on the website.

I'm also interested in water quackery, and will post some stuff on this as I come across new examples.

Labels: chemical, design, effluent, engineer, environment, etp, groundwater, industrial, package, PCB, pharmaceutical, plant, problem, sewage, sludge, treatment, troubleshooting, wastewater